OEM & Service VerifiedSwitch Vehicle
2008 Toyota Sequoia — 5.7L i-FORCE V8 (3UR-FE)
Factory oil grades, U.S. quart capacities, OEM part numbers, torque values, and aftermarket cross-references.
- Oil Viscosity
- 0W-20
- Oil Capacity
- 8.5 qt (8.0L)
- OEM Oil Filter
- 04152-YZZA4
- Factory Tire Size
- 275/65R18
Engine / Trim Configuration
01Engine Oil
Full SpecSpec: API SP / ILSAC GF-6A
- Recommended Viscosity
- 0W-20
- OEM Specification
- API SP / ILSAC GF-6A
- Oil Capacity
- 8.5 qt (8.0L)
02Oil Filter
Full SpecOEM: 04152-YZZA4
03Air Filter
Full Spec- Service Interval
- 15,000–30,000 mi
- Recommended Spec
- Dry Pleated Panel
- Top DIY Brands
- Wix · PurolatorONE · K&N
04Cabin Filter
Full Spec- Service Interval
- 15,000 mi / 12 mo
- Recommended Spec
- Activated Carbon / HEPA
- Top DIY Brands
- Fram Fresh Breeze · Bosch
05Spark Plugs
Full Spec- Cylinders / Plug Count
- 8-cyl
06Brake Pads
Full Spec- Service Interval
- 35,000–60,000 mi
- Recommended Spec
- Low-Dust Ceramic
- Top DIY Brands
- Akebono · Bosch QuietCast
07Battery
Full Spec- Service Interval
- 3–5 Years
- Recommended Spec
- Lead-Acid / AGM 12V
- Top DIY Brands
- Odyssey · Optima · ACDelco
08Wiper Blades
Full Spec- Driver Side
- 26 inch
- Passenger Side
- 22 inch
- Rear Wiper
- 14 inch
09Tire Size
Full SpecFactory Size: 275/65R18 / 275/55R20
- Front Tire Size
- 275/65R18 / 275/55R20
- Rear Tire Size
- 275/65R18 / 275/55R20
- Rim / Wheel Size
- 18"
- Matched Trims
- Limited, Platinum, SR5
Aftermarket Options
- Michelin / Continental / Pirelli 275/65R18
Verified Factory Powertrain & Wheel Fitment (2008 Toyota Sequoia)
| Factory Engine | Drivetrain | Fuel Grade |
|---|---|---|
| 4.7L 8-cyl | Rear-Wheel Drive | Regular Gasoline |
| 5.7L 8-cyl | Rear-Wheel Drive | Regular Gasoline |
| Trim / Package | Front Tire | Rear Tire |
|---|---|---|
| Limited | 275/65R18 / 275/55R20 | 275/65R18 / 275/55R20 |
| Platinum | 275/55R20 | 275/55R20 |
| SR5 | 275/65R18 | 275/65R18 |
DIY Maintenance Schedule & Owner Service Guide (2008 Toyota Sequoia)
Recommended preventative maintenance intervals, DIY skill levels, and essential garage tools for keeping your 2008 Toyota Sequoia running at factory specification.
| Service Item | Recommended Interval | DIY Difficulty | Essential Tools & Notes |
|---|---|---|---|
| Engine Oil & Filter Change | Every 5,000–7,500 mi / 6–12 mo | Beginner (30 min) | Use 0W-20 (8.5 qt (8.0L)). Replace drain plug crush washer every oil change. |
| Cabin Air Filter Replacement | Every 15,000 mi / 12 mo | Beginner (10 min) | Located behind the lower glovebox damper. Verify airflow direction arrow (`AIR FLOW ↓`) before latching the housing. |
| Engine Air Filter Element | Every 15,000–30,000 mi | Beginner (10 min) | Unclip airbox housing and vacuum debris from the lower intake tray before seating the new pleated gasket. |
| Wiper Blades & Tire Rotation | Every 6,000–7,500 mi | Beginner (25 min) | Driver 26 inch / Passenger 22 inch. Torque wheel lug nuts in a star pattern with a calibrated torque wrench. |
| Brake Pads & Rotor Inspection | Every 35,000–60,000 mi | Intermediate (90 min) | Replace pads when friction material reaches 3 mm. Clean and lubricate caliper slide pins with high-temp silicone brake grease; engage EPB service mode if equipped with electronic rear parking brakes. |
| Spark Plugs Replacement | Every 60,000–100,000 mi | Intermediate (45–90 min) | Use a 5/8" or 14mm magnetic swivel spark plug socket on a cold cylinder head. Turbocharged direct-injection (GDI) engines typically require replacement closer to 60,000 mi. |
| 12V Battery & Charging Test | Every 3–5 Years | Beginner (20 min) | Match BCI group size and cold cranking amps (CCA). Disconnect negative (-) terminal first (10mm wrench) and replace AGM batteries with AGM-rated units on Auto Start-Stop vehicles. |
Sources: NHTSA vPIC Vehicle Registry, US EPA FuelEconomy.gov & OEM Fitment SpecificationsReport an inaccurate spec