OEM & Service VerifiedSwitch Vehicle
2010 GMC Canyon — 3.6L V6 (LGZ)
Factory oil grades, U.S. quart capacities, OEM part numbers, torque values, and aftermarket cross-references.
- Oil Viscosity
- See Spec Sheet
- Oil Capacity
- Owner's Manual
- OEM Oil Filter
- ACDelco PF63E
- Factory Tire Size
- 215/70R16
Engine / Trim Configuration
01Engine Oil
Full Spec- Factory Engine
- 2.9L 4-cyl / 3.7L 5-cyl / 5.3L 8-cyl
- Fuel Type
- Regular Gasoline
02Oil Filter
Full SpecOEM: ACDelco PF63E
03Air Filter
Full SpecOEM: ACDelco A3230C
04Cabin Filter
Full SpecOEM: ACDelco CF185
05Spark Plugs
Full Spec- Cylinders / Plug Count
- 4-cyl / 5-cyl / 8-cyl
06Brake Pads
Full Spec- Service Interval
- 35,000–60,000 mi
- Recommended Spec
- Low-Dust Ceramic
- Top DIY Brands
- Akebono · Bosch QuietCast
07Battery
Full Spec- Battery Group Size
- Group 48 (H6) / 94R (H7)
08Wiper Blades
Full Spec- Driver Side
- 22 inch
- Passenger Side
- 18 inch
09Tire Size
Full SpecFactory Size: 215/70R16 / 235/75R16 / 265/70R17 / 235/50R18
- Front Tire Size
- 215/70R16 / 235/75R16 / 265/70R17 / 235/50R18
- Rear Tire Size
- 215/70R16 / 235/75R16 / 265/70R17 / 235/50R18
- Rim / Wheel Size
- 16"
- Matched Trims
- SLE 2wd, SLE 2wd V8, SLE 4wd
Aftermarket Options
- Michelin / Continental / Pirelli 215/70R16
Verified Factory Powertrain & Wheel Fitment (2010 GMC Canyon)
| Factory Engine | Drivetrain | Fuel Grade |
|---|---|---|
| 2.9L 4-cyl | Rear-Wheel Drive | Regular Gasoline |
| 3.7L 5-cyl | Rear-Wheel Drive | Regular Gasoline |
| 5.3L 8-cyl | Rear-Wheel Drive | Regular Gasoline |
| Trim / Package | Front Tire | Rear Tire |
|---|---|---|
| SLE 2wd | 215/70R16 | 215/70R16 |
| SLE 2wd V8 | 235/75R16 | 235/75R16 |
| SLE 4wd | 235/75R16 | 235/75R16 |
| SLE Z71 | 265/70R17 | 265/70R17 |
| SLE ZQ8 | 235/50R18 | 235/50R18 |
| SLT 2wd | 215/70R16 | 215/70R16 |
| SLT 2wd V8 | 235/75R16 | 235/75R16 |
| SLT 4wd | 235/75R16 | 235/75R16 |
DIY Maintenance Schedule & Owner Service Guide (2010 GMC Canyon)
Recommended preventative maintenance intervals, DIY skill levels, and essential garage tools for keeping your 2010 GMC Canyon running at factory specification.
| Service Item | Recommended Interval | DIY Difficulty | Essential Tools & Notes |
|---|---|---|---|
| Engine Oil & Filter Change | Every 5,000–7,500 mi / 6–12 mo | Beginner (30 min) | Use full-synthetic oil meeting OEM spec. Replace drain plug crush washer every oil change. |
| Cabin Air Filter Replacement | Every 15,000 mi / 12 mo | Beginner (10 min) | Located behind the lower glovebox damper. Verify airflow direction arrow (`AIR FLOW ↓`) before latching the housing. |
| Engine Air Filter Element | Every 15,000–30,000 mi | Beginner (10 min) | Unclip airbox housing and vacuum debris from the lower intake tray before seating the new pleated gasket. |
| Wiper Blades & Tire Rotation | Every 6,000–7,500 mi | Beginner (25 min) | Driver 22 inch / Passenger 18 inch. Torque wheel lug nuts in a star pattern with a calibrated torque wrench. |
| Brake Pads & Rotor Inspection | Every 35,000–60,000 mi | Intermediate (90 min) | Replace pads when friction material reaches 3 mm. Clean and lubricate caliper slide pins with high-temp silicone brake grease; engage EPB service mode if equipped with electronic rear parking brakes. |
| Spark Plugs Replacement | Every 60,000–100,000 mi | Intermediate (45–90 min) | Use a 5/8" or 14mm magnetic swivel spark plug socket on a cold cylinder head. Turbocharged direct-injection (GDI) engines typically require replacement closer to 60,000 mi. |
| 12V Battery & Charging Test | Every 3–5 Years | Beginner (20 min) | BCI Group Group 48 (H6) / 94R (H7) (OEM CCA). Disconnect negative (-) terminal first (10mm wrench) and replace AGM batteries with AGM-rated units on Auto Start-Stop vehicles. |
Sources: NHTSA vPIC Vehicle Registry, US EPA FuelEconomy.gov & OEM Fitment SpecificationsReport an inaccurate spec