OEM & Service VerifiedSwitch Vehicle
2010 Toyota Tundra — 3.4L Twin-Turbo V6 (V35A-FTS)
Factory oil grades, U.S. quart capacities, OEM part numbers, torque values, and aftermarket cross-references.
- Oil Viscosity
- 0W-20
- Oil Capacity
- Owner's Manual
- OEM Oil Filter
- 04152-YZZA8
- Factory Tire Size
- 255/70R18
Engine / Trim Configuration
01Engine Oil
Full SpecSpec: API SP / ILSAC GF-6A
- Recommended Viscosity
- 0W-20
- OEM Specification
- API SP / ILSAC GF-6A
02Oil Filter
Full SpecOEM: 04152-YZZA8
03Air Filter
Full SpecOEM: 17801-F4010 (Qty 2)
04Cabin Filter
Full SpecOEM: 87139-0C010
06Brake Pads
Full SpecOEM: 04465-0C050
07Battery
Full Spec- Battery Group Size
- Group 94R (H7) / 49 (H8) AGM
08Wiper Blades
Full Spec- Driver Side
- 26 inch
- Passenger Side
- 22 inch
09Tire Size
Full SpecFactory Size: 255/70R18 / 275/65R18 / 275/55R20
- Front Tire Size
- 255/70R18 / 275/65R18 / 275/55R20
- Rear Tire Size
- 255/70R18 / 275/65R18 / 275/55R20
- Rim / Wheel Size
- 18"
- Matched Trims
- CrewMax 4x2, CrewMax 4x4, Double Cab 4x2
Aftermarket Options
- Michelin / Continental / Pirelli 255/70R18
Verified Factory Powertrain & Wheel Fitment (2010 Toyota Tundra)
| Factory Engine | Drivetrain | Fuel Grade |
|---|---|---|
| 4.0L 6-cyl | Rear-Wheel Drive | Regular Gasoline |
| 4.6L 8-cyl | Rear-Wheel Drive | Regular Gasoline |
| 5.7L 8-cyl | Rear-Wheel Drive | Regular Gasoline |
| Trim / Package | Front Tire | Rear Tire |
|---|---|---|
| CrewMax 4x2 | 255/70R18 / 275/65R18 / 275/55R20 | 255/70R18 / 275/65R18 / 275/55R20 |
| CrewMax 4x4 | 255/70R18 / 275/65R18 / 275/55R20 | 255/70R18 / 275/65R18 / 275/55R20 |
| Double Cab 4x2 | 255/70R18 / 275/65R18 / 275/55R20 | 255/70R18 / 275/65R18 / 275/55R20 |
| Double Cab 4x4 | 255/70R18 / 275/65R18 / 275/55R20 | 255/70R18 / 275/65R18 / 275/55R20 |
| Regular Cab 4x2 | 255/70R18 / 275/65R18 | 255/70R18 / 275/65R18 |
| Regular Cab 4x4 | 255/70R18 / 275/65R18 | 255/70R18 / 275/65R18 |
DIY Maintenance Schedule & Owner Service Guide (2010 Toyota Tundra)
Recommended preventative maintenance intervals, DIY skill levels, and essential garage tools for keeping your 2010 Toyota Tundra running at factory specification.
| Service Item | Recommended Interval | DIY Difficulty | Essential Tools & Notes |
|---|---|---|---|
| Engine Oil & Filter Change | Every 5,000–7,500 mi / 6–12 mo | Beginner (30 min) | Use 0W-20 (N/A). Replace drain plug crush washer every oil change. |
| Cabin Air Filter Replacement | Every 15,000 mi / 12 mo | Beginner (10 min) | Located behind the lower glovebox damper. Verify airflow direction arrow (`AIR FLOW ↓`) before latching the housing. |
| Engine Air Filter Element | Every 15,000–30,000 mi | Beginner (10 min) | Unclip airbox housing and vacuum debris from the lower intake tray before seating the new pleated gasket. |
| Wiper Blades & Tire Rotation | Every 6,000–7,500 mi | Beginner (25 min) | Driver 26 inch / Passenger 22 inch. Torque wheel lug nuts in a star pattern with a calibrated torque wrench. |
| Brake Pads & Rotor Inspection | Every 35,000–60,000 mi | Intermediate (90 min) | Replace pads when friction material reaches 3 mm. Clean and lubricate caliper slide pins with high-temp silicone brake grease; engage EPB service mode if equipped with electronic rear parking brakes. |
| Spark Plugs Replacement | Every 60,000–100,000 mi | Intermediate (45–90 min) | Use a 5/8" or 14mm magnetic swivel spark plug socket on a cold cylinder head. Turbocharged direct-injection (GDI) engines typically require replacement closer to 60,000 mi. |
| 12V Battery & Charging Test | Every 3–5 Years | Beginner (20 min) | BCI Group Group 94R (H7) / 49 (H8) AGM (OEM CCA). Disconnect negative (-) terminal first (10mm wrench) and replace AGM batteries with AGM-rated units on Auto Start-Stop vehicles. |
Sources: NHTSA vPIC Vehicle Registry, US EPA FuelEconomy.gov & OEM Fitment SpecificationsReport an inaccurate spec