OEM & Service VerifiedSwitch Vehicle
2012 Hyundai Elantra — 2.0L Smartstream I4
Factory oil grades, U.S. quart capacities, OEM part numbers, torque values, and aftermarket cross-references.
- Oil Viscosity
- 0W-20
- Oil Capacity
- 4.5 qt (4.3L)
- OEM Oil Filter
- 26350-2J000
- Factory Tire Size
- 195/65R15
Engine / Trim Configuration
01Engine Oil
Full SpecSpec: API SP / ILSAC GF-6A
- Recommended Viscosity
- 0W-20
- OEM Specification
- API SP / ILSAC GF-6A
- Oil Capacity
- 4.5 qt (4.3L)
02Oil Filter
Full SpecOEM: 26350-2J000
03Air Filter
Full SpecOEM: 28113-AA100
04Cabin Filter
Full SpecOEM: 97133-L1000
07Battery
Full Spec- Battery Group Size
- Group 47 (H5)
- Cold Cranking Amps (CCA)
- 600 CCA
08Wiper Blades
Full Spec- Driver Side
- 24 inch
- Passenger Side
- 16 inch
09Tire Size
Full SpecFactory Size: 195/65R15 / 205/55R16 / 215/45R17
- Front Tire Size
- 195/65R15 / 205/55R16 / 215/45R17
- Rear Tire Size
- 195/65R15 / 205/55R16 / 215/45R17
- Rim / Wheel Size
- 15"
- Matched Trims
- GLS, Limited, Touring GLS
Aftermarket Options
- Michelin / Continental / Pirelli 195/65R15
Verified Factory Powertrain & Wheel Fitment (2012 Hyundai Elantra)
| Factory Engine | Drivetrain | Fuel Grade |
|---|---|---|
| 1.8L 4-cyl | Front-Wheel Drive | Regular Gasoline |
| Trim / Package | Front Tire | Rear Tire |
|---|---|---|
| GLS | 195/65R15 / 205/55R16 | 195/65R15 / 205/55R16 |
| Limited | 215/45R17 | 215/45R17 |
| Touring GLS | 195/65R15 | 195/65R15 |
| Touring SE | 205/55R16 / 215/45R17 | 205/55R16 / 215/45R17 |
DIY Maintenance Schedule & Owner Service Guide (2012 Hyundai Elantra)
Recommended preventative maintenance intervals, DIY skill levels, and essential garage tools for keeping your 2012 Hyundai Elantra running at factory specification.
| Service Item | Recommended Interval | DIY Difficulty | Essential Tools & Notes |
|---|---|---|---|
| Engine Oil & Filter Change | Every 5,000–7,500 mi / 6–12 mo | Beginner (30 min) | Use 0W-20 (4.5 qt (4.3L)). Replace drain plug crush washer every oil change. |
| Cabin Air Filter Replacement | Every 15,000 mi / 12 mo | Beginner (10 min) | Located behind the lower glovebox damper. Verify airflow direction arrow (`AIR FLOW ↓`) before latching the housing. |
| Engine Air Filter Element | Every 15,000–30,000 mi | Beginner (10 min) | Unclip airbox housing and vacuum debris from the lower intake tray before seating the new pleated gasket. |
| Wiper Blades & Tire Rotation | Every 6,000–7,500 mi | Beginner (25 min) | Driver 24 inch / Passenger 16 inch. Torque wheel lug nuts in a star pattern with a calibrated torque wrench. |
| Brake Pads & Rotor Inspection | Every 35,000–60,000 mi | Intermediate (90 min) | Replace pads when friction material reaches 3 mm. Clean and lubricate caliper slide pins with high-temp silicone brake grease; engage EPB service mode if equipped with electronic rear parking brakes. |
| Spark Plugs Replacement | Every 60,000–100,000 mi | Intermediate (45–90 min) | Use a 5/8" or 14mm magnetic swivel spark plug socket on a cold cylinder head. Turbocharged direct-injection (GDI) engines typically require replacement closer to 60,000 mi. |
| 12V Battery & Charging Test | Every 3–5 Years | Beginner (20 min) | BCI Group Group 47 (H5) (600 CCA). Disconnect negative (-) terminal first (10mm wrench) and replace AGM batteries with AGM-rated units on Auto Start-Stop vehicles. |
Sources: NHTSA vPIC Vehicle Registry, US EPA FuelEconomy.gov & OEM Fitment SpecificationsReport an inaccurate spec