OEM & Service VerifiedSwitch Vehicle
2010 Honda Accord — 1.5L VTEC Turbo (L15BE)
Factory oil grades, U.S. quart capacities, OEM part numbers, torque values, and aftermarket cross-references.
- Oil Viscosity
- 0W-20
- Oil Capacity
- 3.7 qt (3.5L)
- OEM Oil Filter
- 15400-PLM-A02
- Factory Tire Size
- 225/50R17
Engine / Trim Configuration
01Engine Oil
Full SpecSpec: API SP / ILSAC GF-6A
- Recommended Viscosity
- 0W-20
- OEM Specification
- API SP / ILSAC GF-6A
- Oil Capacity
- 3.7 qt (3.5L)
- Drain Plug Torque
- 29 ft-lb (40 Nm)
- Drain Plug Size
- 17mm
02Oil Filter
Full SpecOEM: 15400-PLM-A02
- Drain Plug Torque
- 29 ft-lb (40 Nm)
- Drain Plug Size
- 17mm
Aftermarket Options
- Fram XG7317
- Wix 57356
03Air Filter
Full SpecOEM: 17220-6A0-A00
05Spark Plugs
Full SpecOEM: 12290-5PA-A01
- Factory Plug Gap
- 0.030 in
- Cylinders / Plug Count
- 4-cyl / 6-cyl
Aftermarket Options
- NGK ILZKAR8J8SY
07Battery
Full Spec- Battery Group Size
- Group 47 (H5 / LN2)
08Wiper Blades
Full Spec- Driver Side
- 26 inch
- Passenger Side
- 19 inch
09Tire Size
Full SpecFactory Size: 225/50R17 / 235/45R18 / 225/65R17 / 225/60R18
- Front Tire Size
- 225/50R17 / 235/45R18 / 225/65R17 / 225/60R18
- Rear Tire Size
- 225/50R17 / 235/45R18 / 225/65R17 / 225/60R18
- Rim / Wheel Size
- 17"
- Lug Nut Torque
- 80 ft-lb (108 Nm)
- Matched Trims
- Coupe EX, Coupe EX-L, Coupe EX-L V6
Aftermarket Options
- Michelin / Continental / Pirelli 225/50R17
Verified Factory Powertrain & Wheel Fitment (2010 Honda Accord)
| Factory Engine | Drivetrain | Fuel Grade |
|---|---|---|
| 2.4L 4-cyl | Front-Wheel Drive | Regular Gasoline |
| 3.5L 6-cyl | Front-Wheel Drive | Regular Gasoline |
| Trim / Package | Front Tire | Rear Tire |
|---|---|---|
| Coupe EX | 225/50R17 | 225/50R17 |
| Coupe EX-L | 225/50R17 | 225/50R17 |
| Coupe EX-L V6 | 235/45R18 | 235/45R18 |
| Coupe LX-S | 225/50R17 | 225/50R17 |
| Crosstour EX | 225/65R17 | 225/65R17 |
| Crosstour EX-L | 225/60R18 | 225/60R18 |
| Sedan EX | 225/50R17 | 225/50R17 |
| Sedan EX V6 | 225/50R17 | 225/50R17 |
Engine & Trim Specification Comparison (2010 Honda Accord)
| Engine / Trim | Oil Type | Capacity | OEM Oil Filter |
|---|---|---|---|
| 2.4L 4-Cyl (LX / EX / Sport) | 0W-20 | 4.4 qt (4.2L) | 15400-PLM-A02 |
| 1.5L Turbo (LX / EX / Sport) | 0W-20 | 3.7 qt (3.5L) | 15400-PLM-A02 |
| 1.5L Turbo (LX / EX) | 0W-20 | 3.7 qt (3.5L) | 15400-PLM-A02 |
| 2.0L Turbo (Sport / Touring) | 0W-20 | Check manual | 15400-PLM-A02 |
| 2.0L Hybrid (Sport / EX-L / Touring) | 0W-20 | 4.2 qt (4.0L) | 15400-PLM-A02 |
| 2.0L Hybrid (Sport / EX-L / Touring) | 0W-20 | 4.2 qt (4.0L) | 15400-PLM-A02 |
| 2.0L Hybrid (Sport / EX-L / Touring) | 0W-20 | 4.2 qt (4.0L) | 15400-PLM-A02 |
DIY Maintenance Schedule & Owner Service Guide (2010 Honda Accord)
Recommended preventative maintenance intervals, DIY skill levels, and essential garage tools for keeping your 2010 Honda Accord running at factory specification.
| Service Item | Recommended Interval | DIY Difficulty | Essential Tools & Notes |
|---|---|---|---|
| Engine Oil & Filter Change | Every 5,000–7,500 mi / 6–12 mo | Beginner (30 min) | Use 0W-20 (3.7 qt (3.5L)). Replace drain plug crush washer every oil change. |
| Cabin Air Filter Replacement | Every 15,000 mi / 12 mo | Beginner (10 min) | Located behind the lower glovebox damper. Verify airflow direction arrow (`AIR FLOW ↓`) before latching the housing. |
| Engine Air Filter Element | Every 15,000–30,000 mi | Beginner (10 min) | Unclip airbox housing and vacuum debris from the lower intake tray before seating the new pleated gasket. |
| Wiper Blades & Tire Rotation | Every 6,000–7,500 mi | Beginner (25 min) | Driver 26 inch / Passenger 19 inch. Torque wheel lug nuts in a star pattern with a calibrated torque wrench. |
| Brake Pads & Rotor Inspection | Every 35,000–60,000 mi | Intermediate (90 min) | Replace pads when friction material reaches 3 mm. Clean and lubricate caliper slide pins with high-temp silicone brake grease; engage EPB service mode if equipped with electronic rear parking brakes. |
| Spark Plugs Replacement | Every 60,000–100,000 mi | Intermediate (45–90 min) | Use a 5/8" or 14mm magnetic swivel spark plug socket on a cold cylinder head. Turbocharged direct-injection (GDI) engines typically require replacement closer to 60,000 mi. |
| 12V Battery & Charging Test | Every 3–5 Years | Beginner (20 min) | BCI Group Group 47 (H5 / LN2) (OEM CCA). Disconnect negative (-) terminal first (10mm wrench) and replace AGM batteries with AGM-rated units on Auto Start-Stop vehicles. |
Sources: NHTSA vPIC Vehicle Registry, US EPA FuelEconomy.gov & OEM Fitment SpecificationsReport an inaccurate spec