OEM & Service VerifiedSwitch Vehicle
2010 Toyota Highlander — 2.4L Turbo I4 (T24A-FTS)
Factory oil grades, U.S. quart capacities, OEM part numbers, torque values, and aftermarket cross-references.
- Oil Viscosity
- 0W-20
- Oil Capacity
- Owner's Manual
- OEM Oil Filter
- 90915-YZZN1
- Factory Tire Size
- 245/65R17
Engine / Trim Configuration
01Engine Oil
Full SpecSpec: API SP / ILSAC GF-6A
- Recommended Viscosity
- 0W-20
- OEM Specification
- API SP / ILSAC GF-6A
02Oil Filter
Full SpecOEM: 90915-YZZN1
03Air Filter
Full Spec- Service Interval
- 15,000–30,000 mi
- Recommended Spec
- Dry Pleated Panel
- Top DIY Brands
- Wix · PurolatorONE · K&N
04Cabin Filter
Full SpecOEM: 87139-0E040
05Spark Plugs
Full Spec- Cylinders / Plug Count
- 4-cyl / 6-cyl
07Battery
Full Spec- Battery Group Size
- Group H5 / H6 AGM
08Wiper Blades
Full Spec- Driver Side
- 26 inch
- Passenger Side
- 18 inch
- Rear Wiper
- 12 inch
09Tire Size
Full SpecFactory Size: 245/65R17 / 245/55R19
- Front Tire Size
- 245/65R17 / 245/55R19
- Rear Tire Size
- 245/65R17 / 245/55R19
- Rim / Wheel Size
- 17"
- Matched Trims
- Base Model, Hybrid, Hybrid Limited
Aftermarket Options
- Michelin / Continental / Pirelli 245/65R17
Verified Factory Powertrain & Wheel Fitment (2010 Toyota Highlander)
| Factory Engine | Drivetrain | Fuel Grade |
|---|---|---|
| 2.7L 4-cyl | Front-Wheel Drive | Regular Gasoline |
| 3.5L 6-cyl | Front-Wheel Drive | Regular Gasoline |
| 3.3L 6-cyl Hybrid | All-Wheel Drive | Regular Gasoline |
| Trim / Package | Front Tire | Rear Tire |
|---|---|---|
| Base Model | 245/65R17 | 245/65R17 |
| Hybrid | 245/65R17 / 245/55R19 | 245/65R17 / 245/55R19 |
| Hybrid Limited | 245/55R19 | 245/55R19 |
| Limited | 245/55R19 | 245/55R19 |
| SE | 245/65R17 | 245/65R17 |
| Sport | 245/55R19 | 245/55R19 |
Engine & Trim Specification Comparison (2010 Toyota Highlander)
| Engine / Trim | Oil Type | Capacity | OEM Oil Filter |
|---|---|---|---|
| 3.5L V6 | 0W-20 | 5.8 qt (5.5L) | 04152-YZZA7 |
| 3.5L V6 | 0W-20 | 5.8 qt (5.5L) | 04152-YZZA7 |
| 2.5L Hybrid (A25A-FXS) | 0W-16 | 4.8 qt (4.5L) | 04152-YZZA6 |
| 2.4L Turbo (T24A-FTS) | 0W-20 | Check manual | 90915-YZZN1 |
DIY Maintenance Schedule & Owner Service Guide (2010 Toyota Highlander)
Recommended preventative maintenance intervals, DIY skill levels, and essential garage tools for keeping your 2010 Toyota Highlander running at factory specification.
| Service Item | Recommended Interval | DIY Difficulty | Essential Tools & Notes |
|---|---|---|---|
| Engine Oil & Filter Change | Every 5,000–7,500 mi / 6–12 mo | Beginner (30 min) | Use 0W-20 (N/A). Replace drain plug crush washer every oil change. |
| Cabin Air Filter Replacement | Every 15,000 mi / 12 mo | Beginner (10 min) | Located behind the lower glovebox damper. Verify airflow direction arrow (`AIR FLOW ↓`) before latching the housing. |
| Engine Air Filter Element | Every 15,000–30,000 mi | Beginner (10 min) | Unclip airbox housing and vacuum debris from the lower intake tray before seating the new pleated gasket. |
| Wiper Blades & Tire Rotation | Every 6,000–7,500 mi | Beginner (25 min) | Driver 26 inch / Passenger 18 inch. Torque wheel lug nuts in a star pattern with a calibrated torque wrench. |
| Brake Pads & Rotor Inspection | Every 35,000–60,000 mi | Intermediate (90 min) | Replace pads when friction material reaches 3 mm. Clean and lubricate caliper slide pins with high-temp silicone brake grease; engage EPB service mode if equipped with electronic rear parking brakes. |
| Spark Plugs Replacement | Every 60,000–100,000 mi | Intermediate (45–90 min) | Use a 5/8" or 14mm magnetic swivel spark plug socket on a cold cylinder head. Turbocharged direct-injection (GDI) engines typically require replacement closer to 60,000 mi. |
| 12V Battery & Charging Test | Every 3–5 Years | Beginner (20 min) | BCI Group Group H5 / H6 AGM (OEM CCA). Disconnect negative (-) terminal first (10mm wrench) and replace AGM batteries with AGM-rated units on Auto Start-Stop vehicles. |
Sources: NHTSA vPIC Vehicle Registry, US EPA FuelEconomy.gov & OEM Fitment SpecificationsReport an inaccurate spec