OEM & Service VerifiedSwitch Vehicle
2011 Ford Explorer — 3.0L EcoBoost Twin-Turbo V6
Factory oil grades, U.S. quart capacities, OEM part numbers, torque values, and aftermarket cross-references.
- Oil Viscosity
- 5W-30
- Oil Capacity
- 6.0 qt (5.7L)
- OEM Oil Filter
- FL-500S
- Factory Tire Size
- 245/65R17
Engine / Trim Configuration
01Engine Oil
Full SpecSpec: Ford WSS-M2C961-A1
- Recommended Viscosity
- 5W-30
- OEM Specification
- Ford WSS-M2C961-A1
- Oil Capacity
- 6.0 qt (5.7L)
02Oil Filter
Full SpecOEM: FL-500S
03Air Filter
Full SpecOEM: FA-1947
04Cabin Filter
Full SpecOEM: FP-89
05Spark Plugs
Full Spec- Cylinders / Plug Count
- 6-cyl
07Battery
Full Spec- Battery Group Size
- Group 48 (H6) AGM
08Wiper Blades
Full Spec- Driver Side
- 26 inch
- Passenger Side
- 22 inch
- Rear Wiper
- 11 inch
09Tire Size
Full SpecFactory Size: 245/65R17 / 255/50R20 / 245/60R18
- Front Tire Size
- 245/65R17 / 255/50R20 / 245/60R18
- Rear Tire Size
- 245/65R17 / 255/50R20 / 245/60R18
- Rim / Wheel Size
- 17"
- Matched Trims
- Base, Limited, XLT
Aftermarket Options
- Michelin / Continental / Pirelli 245/65R17
Verified Factory Powertrain & Wheel Fitment (2011 Ford Explorer)
| Factory Engine | Drivetrain | Fuel Grade |
|---|---|---|
| 3.5L 6-cyl | Front-Wheel Drive | Regular Gasoline |
| Trim / Package | Front Tire | Rear Tire |
|---|---|---|
| Base | 245/65R17 | 245/65R17 |
| Limited | 255/50R20 | 255/50R20 |
| XLT | 245/60R18 / 255/50R20 | 245/60R18 / 255/50R20 |
Engine & Trim Specification Comparison (2011 Ford Explorer)
| Engine / Trim | Oil Type | Capacity | OEM Oil Filter |
|---|---|---|---|
| 2.3L EcoBoost I4 | 5W-30 | 6.0 qt (5.7L) | FL-910S |
| 3.0L EcoBoost V6 (ST / Platinum / King Ranch) | 5W-30 | 6.0 qt (5.7L) | FL-500S |
| 3.3L V6 / Hybrid | 5W-30 | 6.0 qt (5.7L) | FL-500S |
DIY Maintenance Schedule & Owner Service Guide (2011 Ford Explorer)
Recommended preventative maintenance intervals, DIY skill levels, and essential garage tools for keeping your 2011 Ford Explorer running at factory specification.
| Service Item | Recommended Interval | DIY Difficulty | Essential Tools & Notes |
|---|---|---|---|
| Engine Oil & Filter Change | Every 5,000–7,500 mi / 6–12 mo | Beginner (30 min) | Use 5W-30 (6.0 qt (5.7L)). Replace drain plug crush washer every oil change. |
| Cabin Air Filter Replacement | Every 15,000 mi / 12 mo | Beginner (10 min) | Located behind the lower glovebox damper. Verify airflow direction arrow (`AIR FLOW ↓`) before latching the housing. |
| Engine Air Filter Element | Every 15,000–30,000 mi | Beginner (10 min) | Unclip airbox housing and vacuum debris from the lower intake tray before seating the new pleated gasket. |
| Wiper Blades & Tire Rotation | Every 6,000–7,500 mi | Beginner (25 min) | Driver 26 inch / Passenger 22 inch. Torque wheel lug nuts in a star pattern with a calibrated torque wrench. |
| Brake Pads & Rotor Inspection | Every 35,000–60,000 mi | Intermediate (90 min) | Replace pads when friction material reaches 3 mm. Clean and lubricate caliper slide pins with high-temp silicone brake grease; engage EPB service mode if equipped with electronic rear parking brakes. |
| Spark Plugs Replacement | Every 60,000–100,000 mi | Intermediate (45–90 min) | Use a 5/8" or 14mm magnetic swivel spark plug socket on a cold cylinder head. Turbocharged direct-injection (GDI) engines typically require replacement closer to 60,000 mi. |
| 12V Battery & Charging Test | Every 3–5 Years | Beginner (20 min) | BCI Group Group 48 (H6) AGM (OEM CCA). Disconnect negative (-) terminal first (10mm wrench) and replace AGM batteries with AGM-rated units on Auto Start-Stop vehicles. |
Sources: NHTSA vPIC Vehicle Registry, US EPA FuelEconomy.gov & OEM Fitment SpecificationsReport an inaccurate spec