OEM & Service VerifiedSwitch Vehicle
2011 Mercedes Benz S Class — S400 / S400L 3.0L V6 BiTurbo (M276)
Factory oil grades, U.S. quart capacities, OEM part numbers, torque values, and aftermarket cross-references.
- Oil Viscosity
- 5W-40 / 0W-40
- Oil Capacity
- 6.9 qt (6.5L)
- OEM Oil Filter
- A276-180-00-09
- Factory Tire Size
- 245/50R18
Engine / Trim Configuration
01Engine Oil
Full SpecSpec: MB 229.5
- Recommended Viscosity
- 5W-40 / 0W-40
- OEM Specification
- MB 229.5
- Oil Capacity
- 6.9 qt (6.5L)
03Air Filter
Full SpecOEM: A276-094-05-04
04Cabin Filter
Full SpecOEM: A222-830-04-18
05Spark Plugs
Full SpecOEM: A004-159-79-03
- Cylinders / Plug Count
- 8-cyl / 6-cyl / 12-cyl
Aftermarket Options
- NGK SILZKFR8D7S (95875)
07Battery
Full Spec- Battery Group Size
- Group 49 (H8) AGM
- Cold Cranking Amps (CCA)
- 850 CCA
08Wiper Blades
Full Spec- Driver Side
- 24 inch
- Passenger Side
- 22 inch
09Tire Size
Full SpecFactory Size: 245/50R18
- Front Tire Size
- 245/50R18
- Rear Tire Size
- 245/50R18
- Rim / Wheel Size
- 18x8J
- Matched Trims
- Sedan 4MATIC, Sedan 4MATIC Sport Package, Sedan Sport Package
Aftermarket Options
- Michelin / Continental / Pirelli 245/50R18
Verified Factory Powertrain & Wheel Fitment (2011 Mercedes Benz S Class)
| Factory Engine | Drivetrain | Fuel Grade |
|---|---|---|
| 5.5L 8-cyl | Rear-Wheel Drive | Premium Gasoline |
| 3.5L 6-cyl Hybrid | Rear-Wheel Drive | Premium Gasoline |
| 5.5L 12-cyl Turbo | Rear-Wheel Drive | Premium Gasoline |
| 5.5L 8-cyl Turbo | Rear-Wheel Drive | Premium Gasoline |
| 6.0L 12-cyl Turbo | Rear-Wheel Drive | Premium Gasoline |
| Trim / Package | Front Tire | Rear Tire |
|---|---|---|
| Sedan 4MATIC | 255/45R18 | 255/45R18 |
| Sedan 4MATIC Sport Package | 255/40R19 | 255/40R19 |
| Sedan Sport Package | 255/40R19 | 275/40R19 |
| Sedan Standard Model | 255/45R18 | 255/45R18 |
Engine & Trim Specification Comparison (2011 Mercedes Benz S Class)
| Engine / Trim | Oil Type | Capacity | OEM Oil Filter |
|---|---|---|---|
| S350d (3.0L V6 Diesel) | 5W-30 (Low-SAPS) | 8.5 qt (8.0L) | A642-180-00-09 |
| S400 / S400 Long (3.0L V6 BiTurbo) | 5W-40 / 0W-40 | 6.9 qt (6.5L) | A276-180-00-09 |
| S500 / S550 (4.7L V8 BiTurbo) | 5W-40 / 0W-40 | 9.0 qt (8.5L) | A278-180-00-09 |
| S63 AMG (5.5L V8 BiTurbo) | 0W-40 / 5W-40 | 9.0 qt (8.5L) | A278-180-00-09 |
| S600 / S65 AMG (6.0L V12 BiTurbo) | 0W-40 / 5W-40 | 10.0 qt (9.5L) | A275-180-00-09 |
DIY Maintenance Schedule & Owner Service Guide (2011 Mercedes Benz S Class)
Recommended preventative maintenance intervals, DIY skill levels, and essential garage tools for keeping your 2011 Mercedes Benz S Class running at factory specification.
| Service Item | Recommended Interval | DIY Difficulty | Essential Tools & Notes |
|---|---|---|---|
| Engine Oil & Filter Change | Every 5,000–7,500 mi / 6–12 mo | Beginner (30 min) | Use 5W-40 / 0W-40 (6.9 qt (6.5L)). Replace drain plug crush washer every oil change. |
| Cabin Air Filter Replacement | Every 15,000 mi / 12 mo | Beginner (10 min) | Located behind the lower glovebox damper. Verify airflow direction arrow (`AIR FLOW ↓`) before latching the housing. |
| Engine Air Filter Element | Every 15,000–30,000 mi | Beginner (10 min) | Unclip airbox housing and vacuum debris from the lower intake tray before seating the new pleated gasket. |
| Wiper Blades & Tire Rotation | Every 6,000–7,500 mi | Beginner (25 min) | Driver 24 inch / Passenger 22 inch. Torque wheel lug nuts in a star pattern with a calibrated torque wrench. |
| Brake Pads & Rotor Inspection | Every 35,000–60,000 mi | Intermediate (90 min) | Replace pads when friction material reaches 3 mm. Clean and lubricate caliper slide pins with high-temp silicone brake grease; engage EPB service mode if equipped with electronic rear parking brakes. |
| Spark Plugs Replacement | Every 60,000–100,000 mi | Intermediate (45–90 min) | Use a 5/8" or 14mm magnetic swivel spark plug socket on a cold cylinder head. Turbocharged direct-injection (GDI) engines typically require replacement closer to 60,000 mi. |
| 12V Battery & Charging Test | Every 3–5 Years | Beginner (20 min) | BCI Group Group 49 (H8) AGM (850 CCA). Disconnect negative (-) terminal first (10mm wrench) and replace AGM batteries with AGM-rated units on Auto Start-Stop vehicles. |
Sources: NHTSA vPIC Vehicle Registry, US EPA FuelEconomy.gov & OEM Fitment SpecificationsReport an inaccurate spec